• <tt id="fglkf"></tt>
  • <b id="fglkf"></b>
        <source id="fglkf"></source>
      無負壓供水設備
      無負壓供水設備
      穩流罐
      homehomehome
      行業新聞當前位置:網站首頁 > 新聞動態 > 行業新聞
      當變頻供水設備出現故障時我們應該怎么做?
      時間:2018-07-11 17:06 ??來源:未知?? 作者:xghl

      無負壓變頻供水設備10
      變頻供水設備出現故障現象后,首先不要急于動手,應該從出現事故經過及現象分析入手。若用戶對設備比較生疏,應該仔細閱讀相關使用說明書,遵循設備的操作規則。而且在對設備進行拆卸前,一定要清楚每個部件的功能、位置、連接方式以及和周圍其他部件的關系。辦法是,一邊拆卸,一邊畫草圖,做好標記,先外部后內部。
      When the frequency conversion water supply equipment fails, first of all, do not rush to start. We should start with the analysis of the accident and the phenomenon. If the user is relatively unfamiliar with the equipment, he should read the relevant instruction manual carefully and follow the operation rules of the equipment. And before disassembling the equipment, it is necessary to know the function, location, connection mode of each part and the relationship with other parts around it. The best way to do this is to remove and draw sketches and mark them first, then inside and outside.
      在給設備做檢查時,應該遵循由外及里的基本原則。首先是檢查設備電源是否正常,設備外觀有無明顯裂痕、缺損、運行噪聲異常等外部損壞跡象,清楚其使用年限和維修史,然后再對設備內部進行檢查。在對設備拆卸前必須確定問題是出現在設備內部,否則盲目拆卸,反而會使設備越修越壞。
      When checking equipment, we should follow the basic principles of external and internal. The first is to check the equipment power is normal, the appearance of the equipment appearance has no obvious cracks, defects, abnormal operation noise and other external damage signs, clear its service life and maintenance history, and then the internal inspection of the equipment. Before the equipment is dismantled, the problem must be identified inside the equipment. Otherwise, it will make the equipment worse and worse.

      上一篇:不銹鋼拼接水箱在生活中的使用注意事項 下一篇:沒有了
      ? 欧美成人三级经典中文字幕_起碰97免费视频_国产一线免费在线网站_国产网站午夜性色

    1. <tt id="fglkf"></tt>
    2. <b id="fglkf"></b>
          <source id="fglkf"></source>